Mega series camera will not add as an ONVIF device on 3rd party recorders.
- Verify the camera has a password configured and try to add it to the recorder.
- If the camera does not add, remove the password from the camera and on the recorder configure the camera to have a username and password of "admin."
- Try to add the camera with no password at all.
- If needed, refer to the following article on testing to see if another tool can pull the cameras ONVIF stream: https://arecontvision.zendesk.com/hc/en-us/articles/360055559854-Troubleshooting-VMS-integrations-with-ONVIF-Device-Manager-
*For cameras that require an initial password before operation (new firmware), there is a command to set the initial password without the rules (if password admin is needed).