Example installation manual that will discuss mounting configuration best practices
Click here for more detailed mounting instructions in the Manual.
Best practice for mounting installation would be to mount on a flat, not porous surface that preferably has overhead protection from severe rain.
- Remove the conduit plug on the junction box adapter and connect ¾” NPT conduit to the
junction box adapter
- Use silicon or water pipe seal tape to make sure no water leakage between conduit pipe and junction box adapter
- Run the Ethernet cable and outside power cable (if necessary) through the supplied rubber
gasket and then through the Junction Box Adapter and SV-WMJB, Wall Mount Adapter. Ensure
the gasket is seated properly
Following these precautions should minimize leakage of outside moisture onto the camera.