Issue: Camera audio needs to be setup.
Note: Audio plugs (Red and Green) on the camera are 3.5 mm plugs (1/8" mono plug) and not RCA plugs.
The equipment used in this example is an AV05CID-200 and a Louroe ASK-4® #300. Other -200's will have a similar setup. See the manufacturer's documentation on how to properly wire the equipment. The output will be the red cable on the pigtail.
- From the camera web page, click the Video and Audio tab. Scroll down to the audio portion and verify the below settings are on.
- Launch VLC and click Media then Open Network Stream.
- Paste in the following (change the IP address to match your camera) and verify you can hear audio: rtsp://192.168.1.168:554/
Article is closed for comments.